.png){kind=icon}
.png){kind=icon}
Did you find it cheaper? Get in touch with us...We will do our best to benefit you!
Rotel C8+ - Amplificador multicanal 8 x 150W
€3,199.00
VAT included
Entrega em 2 a 4 dias
Política de segurançaWe use reputable external institutions such as SIBS, Eupago, and Cofidis for payments.
Política de expediçãoSee our shipping policy
Política de devoluçãoReturn policy
C8+
Performance and efficiency go hand in hand in this custom-installed Class AB Rotel C8+ amplifier, allowing the use of up to 8 channels of premium audio at 150 watts per channel or, bridged, at 300 watts into 4-ohm loads.
The C8+ has 4 analog inputs and 4 digital matrix inputs for each of the zones. The front panel display and controls allow source selection and separate volume, bass and treble adjustments. The 2U's custom height requires no top or bottom space when mounted in a rack.
Carefully manufactured.
DIMENSIONS (W × H × D)
430 × 97 × 414mm
17" × 3'9" × 16'3"
17" × 3'9" × 16'3"
FRONT PANEL HEIGHT
2U / 88'1mm (3'5")
POWER
230V, 50Hz
CONSUMPTION
980W
STANDBY CONSUMPTION
Normal: <0'5W
Network standby: <2W
NET WEIGHT
18'35kg (40'79lbs.)
BTU RATING (4Ω, at 1/8th power)
2744 BTU/h
MAXIMUM OUTPUT POWER
150W/Ch (8 channels driven, 4Ω)
CONTINUOUS POWER OUTPUT
100W/Ch (8 channels driven, 8Ω)
TOTAL HARMONIC DISTORTION
<0'1%
FREQUENCY RESPONSE
Line Inputs: 10Hz - 100kHz, +0dB, 0 ± 0.5dB
Digital Inputs: 10Hz - 20kHz, 0 ± 0.5dB
SIGNAL TO NOISE RATIO (“A” weighting)
Line Inputs: 100dB
Digital Inputs: 102dB
Performance and efficiency go hand in hand in this custom-installed Class AB Rotel C8+ amplifier, allowing the use of up to 8 channels of premium audio at 150 watts per channel or, bridged, at 300 watts into 4-ohm speakers. This is possible thanks to Rotel's exclusive amplification technology.
The self-made large toroidal transformer allows the use of up to 32 output devices for comfortable and controlled bass energy.
To make the installation as flexible as possible, the C8+ includes 4 analog inputs and 4 digital matrices for each of the zones. The front panel display and controls allow source selection and separate volume, bass and treble adjustments.
Control system integration is possible through IP and RS232 interfaces, and a 12 volt trigger.
The custom height of the 2U requires no top or bottom space when mounted on a rack.
The C8+ is only available in black.
INTERMODULATION DISTORTION (60Hz:7kHz, 4:1)
<0'1%
DAMPING FACTOR (20Hz - 20kHz, 8Ω)
80
TONE CONTROL
± 10dB at 100Hz / 10kHz
CROSSTALK / SEPARATION
>50dB
DIGITAL ANALOG CONVERTERS
Texas Instruments
INPUT SENSITIVITY
Line Inputs: 0'43V
Digital Inputs: -13.5dBfs
INPUT IMPEDANCE
Line Inputs: 31kΩ
Digital Inputs: 75Ω
SATURATION LEVEL
Line Inputs (RCA): 2.8V
DIGITAL INPUTS
SPDIF LPCM (up to 192kHz/24-bit)
Specific References
New
No customer reviews for the moment.
Rotel C8+ - Amplificador multicanal 8 x 150W
€3,199.00
VAT included
Entrega em 2 a 4 dias