MINI HEADPHONES LIVE HEADPHONES WITH STUDIO QUALITY

The new A10 and A10X headphones from AUDIX are designed to offer studio quality reproduction but applicable to sound monitoring in live shows or critical listening, delivering exceptional stereo images and consistent isolation from outside sound.

The A10 and A10X feature a low-mass dynamic voice coil and titanium alloy diaphragm assembly that delivers ten octaves of frequency response with extremely precise phase coherence.

The balanced sound signal of these live headphones allows hours of listening without fatigue.

FEATURES:

• 10 mm dynamic driver with titanium alloy diaphragm for high performance and low distortion
• Linear bass, clear and articulate mids and smooth highs
• Optimized silicone suspension tips (sizes S, M, L) for a perfect seal and high isolation
• Gold-plated MMCX connectors allow for rotation 360 degree for perfect positioning
• Reinforced wire wrap near the connector holds the headset confidently in place (proof from sudden movements or jumps
• Premium silver-plated oxygen-free copper cable with a soft, durable insulator and a 3.5 mm (1/8 in.) gold-plated connector jack

ACCESSORIES SUPPLIED:

•• Protective carrying case
• Detachable 1.5 m cable
• 3 Pairs (small, medium and large) of silicone suspension tips

The A10 and A10X earphones fit securely thanks to their moldable fixing wire

POLAR PATTERN OF NOISE ISOLATION

Noise isolation is the measure of noise levels. outside sound attenuation achieved with the A10 and A10X earbuds that have been properly placed in the ear canals with the appropriate silicone ear tips.
The polar noise isolation pattern of the AUDIX live headphones illustrates how the attenuation of the A10 and A10X headphones varies depending on both the frequency and the direction of the sound source.

In general, lower frequencies will be less attenuated than higher frequencies and sound sources arriving from the sides of the head are less attenuated than those arriving from the front or back. behind.

TECHNICAL SPECIFICATIONS:

• Operating principle: Dynamic with moving coil
• Sensitivity (at 1 kHz): A10 105 dB SPL / mW - A10x:107 dB / mW
• Frequency response: A10 model: 18 Hz - 19 kHz - A10x mode: 10 to 19 kHz
• Impedance: 35 ohms
• Noise isolation * 25 dB at 1 kHz (* See noise isolation polar pattern)
• Driver size 10 mm
• Titanium alloy diaphragm
• Neodymium magnet
• Crystalline, tight-fitting and ventilated polycarbonate housing
• MMCX connectors, 3.5 mm (1/8 in.)
• 1.5 m detachable MMCX cable, braided, oxygen-free copper, 40 µin silver film

NOTE Audix live headphones do not carry noise with any active noise reduction system and are not intended for use as a hearing protection device.