Assembled in the factory itself, each driver of each of the RUBICON models is configured to match the model for which it is intended. The three 6 ½-inch drivers used in the RUBICON 8 work together to reproduce a clean, detailed sound without coloration. The RUBICON series builds on the heritage of the SMC-based linear drive system, which was introduced with the EPICON series. By utilizing SMC driver technology, we have taken another step to eliminate much of the unwanted distortion. The bass is optimized for long excursion, and the midrange driver for a wide range of useful frequencies ensuring that roll-off is handled in the interconnect and not in the driver. All of this ensures that the benefit of SMC can be enjoyed by even more Hi-Fi lovers around the world.

In the RUBICON series, DALI uses both the soft dome tweeter working alone and the hybrid tweeter configuration. Obtaining an incredible representation of the high frequencies. The cone used in the RUBICON series is designed to be very light and agile in order to achieve wider bandwidth. This cone is placed inside a powerful ferrite magnet that maintains strict control over its movements. The ribbon tweeter controls the wide dispersion and in combination with the soft dome, the tweeter module starts working as low as 2.5 KHz. This extreme bandwidth combined with ultra-wide dispersion is an important part of the DALI sound philosophy. 

The RUBICON's sleek exterior serves as a base for low-loss drivers. In all boxes, the midrange and bass drivers are separated into their own chambers. Turbulence is minimized through a bass reflex port, which is placed directly behind each woofer, also optimizing synchronization between the woofer and bass port.

RUBICON 8 It has three drivers that offer a wide soundstage, maximizing frequency separation and deep bass.

• 38 - 34,000 Hz
• 90.5 dB
• 110 x 22 x 44.5 cm
• 27.3 Kgs
• Available in finishes Black High Gloss Lacquer, White High Gloss Lacquer, Wallnut Veneer and Rosso Veneer