FiiO enters the HiFi headphone market through the front door with the presentation of its new model FiiO FT3, the first open over-ear design headphone with dynamic driver. 

After the launch of the EH3NC, the Asian firm is committed to creating truly HiFi headphones with 350 Ohms of impedanceand a top-level internal circuit. Every detail of these headphones has been designed to the millimeter to position themselves as the perfect alternative in their price segment. Let's discover them!

The FiiO FT3 mounts a 60mm dynamic driver that, due to its large size, is capable of supporting greater output power, which generates less distortion under large dynamic signals. It also allows lower frequency reproduction to obtain a deeper bass level.

The diaphragm is one of the most important parts of a dynamic driver and not just any diaphragm material can meet the demands of headphones like the FiiO FT3 due to the large size of its driver.

After countless tests at FiiO, a beryllium plated gasket + DLC diaphragm was chosen. The FT3 controller board is beryllium coated. This not only results in a lighter joint, but also a stiffer joint that can better handle the movement of the large dynamic driver to reduce distortion. The FT3's diaphragm is made of DLC (Diamond-Like Carbon), which is very strong and lightweight compared to other diaphragm materials. This means that the FT3 driver is less prone to breakup and non-linear distortion, while having an extremely extended frequency response and improved soundstage.

The FT3 was designed with great sound as its primary goal and features a 350 ohm impedance to achieve this. Compared to lower impedance headphones, higher impedance headphones more effectively filter noise for the listener, resulting in purer sound with a higher signal-to-noise ratio. The voice coil is made of ultra-thin copper clad Japanese aluminum with a diameter of only 0.0035mm thickness.

This thinner voice coil allows the driver to follow signals better and faster, has anti-interference capabilities and enables thunderous dynamics over a wide frequency response range.

The FT3 uses powerful N52 neodymium magnets to maximize sound quality with its 350 ohm impedance design. These magnets have been arranged in an optimized asymmetrical internal and external magnetic circuit system. When the voice coil begins to move during sound playback, the optimized magnetic circuit balances this movement of the voice coil and diaphragm, especially during large dynamic changes, allowing for more effective use of magnetic energy and better control over the voice coil.

The FT3 cable has a length of 3 meters and is made of high purity materials such as Furukawa monocrystalline copper. 

The exterior of the FiiO FT3 is entirely made of aluminum to guarantee its rigidity without sacrificing lightness. These headphones are the perfect combination of comfortable listening and long-lasting life. 

The design of the FT3 starts with hexagonal elements as a base, and when combined with the usual look of open-back headphones, it gives a bold sci-fi look. The"open back" designfeatures a hollow mesh to not only further reduce weight and achieve greater listening comfort, but also to fully unleash the capabilities of your driver in a more open environment.

The FiiO FT3 features an open back design that reduces unwanted vibrations and resonances and results in a larger soundstage. The result is that the details of the music appear more clearly and naturally in an open soundstage, as if you were listening to a live performance.

As expected, these headphones have undergone extensive fit testing at FiiO Labs, and the 3-axis swivel design is one of the results of those tests.

The 3-axis swivel design was specifically made so that the FT3 could better fit a wide variety of head and face shapes for greater comfort and a better seal to maximize sound quality.

The FT3's driver is angled so that it is parallel to the ear when worn, which helps reduce high-frequency response caused by waves hitting the contour of the ear and not entering it. Angled drivers can also minimize unwanted reflections caused by headphone vents that would cause standing waves and also reduce frequency response distortion.

In addition, towards the rear of the FT3's case there is a reflective tip that is specifically designed to direct the sound waves produced by the driver to prevent unwanted reflections from interfering with each other, to further minimize sound defects and reduce unwanted frequency response artifacts.

The FiiO FT3 come with a couple of sets of ear pads to exchange them according to your preferences.

• Suede Ear Pads (Suede Earpads): for balanced sound, enhanced ambiance and a majestic experience.

• Protein Leather Earpads (Protein Leather Earpads): for clear sound, wide stage and maximum detail.

These FiiO headphones allow you to exchange their connectors without having to purchase additional cables.

• 3.5mm / 4.4mm connectors
• 3.5mm to 6.35mm adapter
• 4.4mm to XLR-4 balanced adapter

To top it off, the FiiO FT3 comes with a leather storage bag, which fully protects your headphones in a lightweight but luxurious package.

• Interchangeable 3.5mm connector
• Interchangeable 4.4mm connector
• 3.5mm female to 6.35mm male adapter
• 4.4mm female to balanced XLR-4 male adapter
• Leather case
• Protein leather pads
• Suede or suede pads
• Headphone cable
• Instruction manual